POSTS
Post-processor development
Mastercam MP and ArtCAM posts built, modified and validated for your machine's kinematics and control, so programs need no hand edits.
Engineering division · CNC programming · Post-processors · Machine recovery
Machine-ready code, from an engineer who has rebuilt the machines.
Twenty years of CNC programming, CAD/CAM and post-processor development across furniture, cabinetry, architectural millwork and aerospace. We make your CAM output run right the first time, and we get stopped machines running again.
20+years of CNC, CAD/CAM and production work
MPMastercam MP Post-Processor Developer certification
0.05mm documented tolerance on aerospace work
1000sof G-code lines written directly at the controller
Services
What we do for your shop
PROGRAMMING
CNC & CAD/CAM programming
Nesting, panel processing, 3 to 5-axis routing, molds and fixtures, delivered as machine-ready packages with labels and cutting lists.
RECOVERY
Machine recovery & recommissioning
Mechanical, electrical and control-level diagnosis. Boring heads, axis brakes, encoder alignment and edgebander timing.
TOOLING
Custom aggregates & fixtures
Adapters and fixtures engineered for jobs a machine was not designed for, with the offsets calculated and proven in production.
CONTROLS
Automation & controls
Siemens TIA Portal V17, Allen-Bradley RSLogix 5000, PLC/HMI, Profinet, Profibus, Modbus and RS-232/485.
OPTIMIZATION
Production optimization & training
Better nesting yield, toolpath sequences and changeovers, with operators and programmers trained in English, French or Arabic.
Why posts matter
A good post is invisible. A bad one costs you every shift.
When a post-processor does not match the machine, programmers fix code by hand, parts are scrapped and first runs fail. We translate the exact kinematics, origins, tool table and aggregates of your machine into post logic that comes out right.
- Headers, tool calls and safety lines that match your control
- Correct work offsets, axis directions and Z-zero convention
- Drilling heads, aggregates and edge operations output properly
- Recurring machine exceptions turned into validated post logic
NEST 01 · 2800 × 2070 · T1 Ø12
Our post-processor process
Five steps, validated on your machine
1 · AUDIT
Capture the machine
Controller, software versions, tool table, magazine, drilling head, aggregates and travel limits.
2 · SPECIFY
Define the output
Kinematics, origins and known-good programs become a written output specification.
3 · BUILD
Write the post
Post logic built and compared line by line against your known-good code.
4 · VALIDATE
Prove it safely
Simulation, dry run and a supervised first part before production use.
5 · HAND OVER
Document & train
Your team receives the documentation and training to own the result.
From the field record
Problems we have solved
BIESSE ROVER 346
Aggregate adapter the machine was not built for
Engineered and validated a fixed aggregate adapter, calculated the Z-axis offset, compensated the programs and proved it in production.
32-SPINDLE BORING HEAD
Jammed head rebuilt
Dismantled and cleaned the block, removed contaminated oil, repacked with OEM-specified grease and verified encoder position and drill alignment at every index.
HOMAG Z-AXIS
Failed holding brake restored
Diagnosed a failed electromagnetic brake on a Z-axis stepper motor, coordinated coil rewinding and restored safe holding.
EDGEBANDER
Premilling and end-trim back in time
Synchronized counter-rotating premilling heads and retimed the leading and trailing end-trim cycles.
Equipment and software
What we have programmed and repaired
Machines & controls
Biesse Rover AS 1536 FTRover K 1536Rover 346Skill G FT 1536HOMAG / Weeke BP 550Weeke drilling & dowel insertingHOLZ-HER DYNESTIC 7507Thermwood 3 & 5-axisEdgebandersJohnsdorf controlsBosch controls
CAD/CAM software
MastercamwoodWOPbSolid / BiesseWorksNC1000NC-HOPSCabinet VisionMozaikALPHACAMArtCAMSolidWorksCATIA V5AutoCAD
Industries
FurnitureCabinetry & kitchensArchitectural millworkAerospaceAluminumComposites
Credentials
- Mastercam MP Post-Processor Developer Certification
- DEP Machining Techniques & ASP Numerical Control, with distinction (Rosemount Technology Centre)
- Bachelor's degree in Computer Science (EPSIL University)
- Microsoft Certified Systems Engineer (MCSE)
Start with the details